|
| |
Part
#
|
23100
Series
|
Description
|
Front Camber Bushings
|
Vehicle
Applications
|
Ford
Trucks
F450, F550 SD 1999-04
Bronco Full Size 1980-92
E250, E350, E450 w/ball joints1980-03
F100, F150 1980-92
F100, F150 1993-96
F250 1980-96
F350 1980-87
|
Adjustment
Range
|
0° through 2-3/4° (see chart below)
|
Installation
Time
|
.5 hours per side
|
Quantity
Required
|
1 bushing per wheel
|
Downloadable Instructions
|
|
M.S.R.P.
|
$33.51
|
To correctly purchase and/or install these bushings, the vehicle
MUST be on an alignment rack.
Part #
|
Maximum Change
|
|
23109
|
0°
|
|
23101
|
1/4°
|
|
23102
|
1/2°
|
|
23103
|
3/4°
|
|
23104
|
1°
|
|
23105
|
1-1/4°
|
|
23106
|
1-1/2°
|
|
23107
|
1-3/4°
|
|
23108
|
2°
|
|
23111
|
2-1/4°
|
|
23112
|
2-1/2°
|
|
23113
|
2-3/4°
|
Ingalls has other style bushings available for these vehicles.
NOTE:
Excessive spindle turning effort or poor steering returnability MAY be
the result of not following the proper tightening sequence or worn/bent ball
joints.
ALWAYS
CHECK FOR SUSPENSION CLEARANCE.
Modifying
any suspension component may change other part clearances and cause binding or
interferences. After installing any
of Ingalls' products, the suspension must be checked for binds or interference
between all components, other arms and the chassis. Be sure that all control
arms, struts and steering ends move freely through the full movement of the
suspension (springs may need to be removed to fully check component travel).
Installing any Ingalls product on a modified vehicle (lowered or raised) from
the original factory design requires a detailed check of all suspension
components and their movements. Ingalls recommends that a trained technician
install and adjust all products.
|
