Part #

35591

Description

Acura/Honda Front Adjustable Ball Joint

Vehicle Applications

Acura 2.2 CL 1996-97
Acura 2.3 CL 1998-99
Acura 2.5 TL 1995-98
Acura 3.0 CL 1996-99
Acura 3.2 CL 2001-03
Acura 3.2 CL 2004
Acura 3.2 TL 1999-02
Acura 3.2 TL 2003
Acura 3.2 TL 2004-08
Acura TSX 2004-08
Honda Accord 1998-02
Honda Accord 2003-07
Honda Civic 1988-91
Honda CRX 1988-92
Honda Odyssey 1995-98

Adjustment Range

+1 1/2° to +3°

Installation Time

.8 hours per side

Quantity Required

1 kit per wheel

Downloadable
Instructions

M.S.R.P.

$169.83
 
 
 
 
 
 
 
 
 
 
 
Ingalls recommends to have a professional installer do all installations and adjustments
LOWERED! These adjustable ball joint will correct camber in the tight confined space on the Newer Accords and Preludes.
 
 

 

 

ALWAYS CHECK FOR SUSPENSION CLEARANCE.
Modifying any suspension component may change other part clearances and cause binding or interferences.  After installing any of Ingalls' products, the suspension must be checked for binds or interference between all components, other arms and the chassis. Be sure that all control arms, struts and steering ends move freely through the full movement of the suspension (springs may need to be removed to fully check component travel). Installing any Ingalls product on a modified vehicle (lowered or raised) from the original factory design requires a detailed check of all suspension components and their movements. Ingalls recommends that a trained technician install and adjust all products.