|
| |
Part
#
|
35860
|
Description
|
Adjustable Rear Camber Kit
|
Vehicle
Applications
|
Chrysler Sebring 2dr 1995-00
Chrysler Sebring 2dr 2001-06
Chrysler Sebring 4dr 1995-00
Dodge Avenger 1995-00
Dodge Stratus 2001-05
Eagle Talon AWD 1995-98
Eagle Talon FWD 1995-98
Mitsubishi Diamante 1997-04
Mitsubishi Eclipse 1995-99
Mitsubishi Eclipse 2000-05
Mitsubishi Eclipse 4wd 1995-99
Mitsubishi Galant 1994-98
Mitsubishi Galant 1999-03
|
Adjustment
Range
|
-1°
to +3°
|
Installation
Time
|
.5 hours per side
|
Quantity
Required
|
1 kit per wheel (2 required for
both front wheel)
|
Downloadable
Instructions
|
|
M.S.R.P.
|
$78.58
|
This kit contains two NEW
fully adjustable brackets. These brackets utilize a cam bolt for a "fine
tune" adjustment through the range of adjustment. The brackets themselves
have a range of + or - 1°. Ingalls includes with this kit 16 specially designed
spacers and longer bolts. These spacers/bolts allow you to obtain up to +3°
without sacrificing a solid and safe mounting surface.
Warning: Avoid using plain
washers to move the factory or Ingalls mounts out to achieve a larger
adjustment. Typical washers do not allow enough surface area to properly mount
the brackets to the inner fender well.
ALWAYS
CHECK FOR SUSPENSION CLEARANCE.
Modifying
any suspension component may change other part clearances and cause binding or
interferences. After installing any
of Ingalls' products, the suspension must be checked for binds or interference
between all components, other arms and the chassis. Be sure that all control
arms, struts and steering ends move freely through the full movement of the
suspension (springs may need to be removed to fully check component travel).
Installing any Ingalls product on a modified vehicle (lowered or raised) from
the original factory design requires a detailed check of all suspension
components and their movements. Ingalls recommends that a trained technician
install and adjust all products.
|
