|
| |
Part
#
|
38600
(polyurethane bushings)
38620 (rubber bushings)
|
Description
|
Rear Camber Adjuster
|
Vehicle
Applications
|
1986-89 Honda Accord
|
Adjustment
Range
|
-2° to +3°
|
Installation
Time
|
.5 hours per side
|
Quantity
Required
|
1 kit per wheel
|
Downloadable
Instructions
|
|
M.S.R.P.
|
38600 - $103.64
38620 - $103.64
|
Polyurethane
bushings are designed for a performance like ride. Polyurethane may squeak if
not properly lubricated. You should use a lubricate will not wash away. Once the
lubricate is washed out or contaminated from road grime the lubricate will no
longer be effective. You will need to re-lubricate.
Rubber
bushings are designed for the "street" use only vehicle. They provide
a more factory like ride. These bushings do not need to be lubricated, but will
not provide you with that "tight" suspension feel.
ALWAYS
CHECK FOR SUSPENSION CLEARANCE.
Modifying
any suspension component may change other part clearances and cause binding or
interferences. After installing any
of Ingalls' products, the suspension must be checked for binds or interference
between all components, other arms and the chassis. Be sure that all control
arms, struts and steering ends move freely through the full movement of the
suspension (springs may need to be removed to fully check component travel).
Installing any Ingalls product on a modified vehicle (lowered or raised) from
the original factory design requires a detailed check of all suspension
components and their movements. Ingalls recommends that a trained technician
install and adjust all products.
|
