|
| |
Part
#
|
59400
|
Description
|
Adjustable Ford Camber/Caster Bushing
|
Vehicle
Applications
|
Ford 4x2 Bronco II (w/pinch bolt
axle) 1989-90
Ford 4x2 E150-E350 1992-08
Ford 4x2 Excursion 2000-05
Ford 4x2 Explorer 1991-94
Ford 4x2 F150 1987-96
Ford 4x2 F250 HD Super Duty 1998-04
Ford 4x2 F250, F350 1987-90
Ford 4x2 F350 1991-04
Ford 4x2 Ranger (w/pinch bolt axle) 1989-97
Ford 4x4 Bronco II (with Pinch Bolt Axle) 1989-90
Ford 4x4 Explorer 1991-94
Ford 4x4 Ranger (with Pinch Bolt Axle) 1989-97
Mazda 4x2 & 4x4 B Series 1994-97
Mazda 4x2 & 4x4 Navajo 1991-94
|
Adjustment
Range
|
Up to 2-1/2° on full size trucks
and 1-3/4° on down size
|
Installation
Time
|
.5 hours per side
|
Quantity
Required
|
1 bushing per wheel
|
Downloadable
Instructions
|
|
M.S.R.P.
|
$42.18
|
For those of
you that prefer the single offset bushings
Ingalls have the 23180 series.
ALWAYS
CHECK FOR SUSPENSION CLEARANCE.
Modifying
any suspension component may change other part clearances and cause binding or
interferences. After installing any
of Ingalls' products, the suspension must be checked for binds or interference
between all components, other arms and the chassis. Be sure that all control
arms, struts and steering ends move freely through the full movement of the
suspension (springs may need to be removed to fully check component travel).
Installing any Ingalls product on a modified vehicle (lowered or raised) from
the original factory design requires a detailed check of all suspension
components and their movements. Ingalls recommends that a trained technician
install and adjust all products.
|
